METZ CONNECT KAPRi plus Grey

The cable and installation tester KAPRi plus detects the most frequent installation failures such as short-circuit, wire interruption, wire reversal and line conversion in an easy, quick and reliable way. The KAPRi plus has more useful features in addition to its basic functions of failure detection such as line identification by identifying up to nine test box numbers (available as extension set 2 to 5 and 6 to 9), indication of external voltage and its polarity, adjustability of the pin assignment, automatic shut off, loose contact test und many more.

Features
- identification and indication of the most frequent installation failures: short-circuit, wire interruption, wire reversal, line reversal, split pair
- identification of external voltage and its polarity for each wire
- line identification by identifying up to nine test box numbers
- identification and indication of incorrect adjusted pin assignment
- failure indication for each wire by nine red LED
- one green LED indicates, when no failure was detected
- distinct indication of the failure type by a numeric display
- low voltage indication for the battery
- automatic test procedure
- easy operation and analysis of the test results
- one key only for ON/OFF and start of the test procedure
- quick test, about 3 seconds
- separate key to monitor the failure list in case of multiple failures
- nine switches to adjust the pin assignment
- nine wire termination cable to test connection cables with up to 8 wires and shield
- RJ45 connections allow test of patch cables, too
- automatic turn-off after 30 seconds
- protected against external voltage
- test function to identify loose contacts
- polarity reversal protection of the battery
- low power consumption for long battery life
- included in delivery: main terminal, test box 1, patch cable, 9V battery and storage bag